Combined cooling, heating and power unit

Product introduction:

Lucy’s patented product CCHP (Combined Cooling, Heating and Power) uses diesel, natural gas or biogas as the main fuel. The generator creates the electricity power, the high temperature flue gas and the jacket water pass through absorption chiller. it can cooling in summer, heating in winter, at same time provide domestic hot water.

Get a free quote

Welcome to visit the factory

Combined cooling, heating and power unit

Product introduction

Lucy’s patented product CCHP (Combined Cooling, Heating and Power) uses diesel, natural gas or biogas as the main fuel. The generator creates the electricity power, the high temperature flue gas and the jacket water pass through absorption chiller. it can cooling in summer, heating in winter, at same time provide domestic hot water.

冷热电系统余热利用机组选型 

Selection of waste heat utilization unit for cooling, heating and power system 

Selection of waste heat unit

Heat source conditions

Features

Single-effect hot water type lithium bromide cooling and heating unit

72-95℃  hot water

Refrigeration, heating, domestic hot water

Two-stage hot water type lithium bromide cooling and heating unit

65-95℃ hot water

Refrigeration, heating, domestic hot water

Flue gas type lithium bromide cooling and heating unit

180-550℃ flue gas

Refrigeration, heating, domestic hot water

Flue gas/hot water type lithium bromide cooling and heating unit

72-95hot water/180-550flue gas

Refrigeration, heating, domestic hot water

Unit parameters

Small cooling, heating and power system

Unit model LRDXZ

10 20 30 50 80 120 200
Rated generating power kW 10 20 30 50 80 120 200

Heat recovery power kW

≥12 ≥25 ≥37 ≥60 ≥92 ≥135 ≥230

Energy utilization%

≥75% ≥75% ≥75% ≥78% ≥78% ≥82% ≥82%

The vehicle-mounted mobile multifunctional energy vehicle integrate power generation, cooling, heating, sanitation and hot water functions, it is convenient to apply to various areas where power supply is inconvenient, such as building construction, ports, border posts, and field camps. , Army logistics support, rescue and disaster relief, film and television shooting and other places where power supply cannot reach.

Medium-sized gas cooling, heating and power system

Unit model LRDXZ

250 350 600 800 1000 1500

Rated generating power kW

250 350 600 800 1000 1500

Heat recovery power kW

≥300 ≥420 ≥700 ≥920 ≥1150 ≥1700

Energy utilization%

≥85% ≥85% ≥85% ≥85% ≥85% ≥85%

Note: Due to the large difference in heat dissipation of the unit, the specific parameters will vary depending on the design system and the selected accessories; each power refers to the average value after the unit is stable; the heat recovery energy utilization refers to the recovered energy of "sanitary hot water + heating or cooling" Sum.

working principle

The cooling, heating and power system adopts different waste heat recovery methods according to the principles of economy and energy. The main parts of the absorption chiller used are as follows:

Product advantages

Product advantages:

System advantages and composition

The integrated cooling, heating and power unit realizes the cascade utilization of energy through the deep recovery of the waste heat of the internal combustion engine, and the energy utilization efficiency can be increased from 35% for simple power generation to more than 85% for combined cooling, heating and power.

Exquisite workmanship and strict quality inspection

The unit has passed fine workmanship to ensure the reliability of product processing; passed the five-process quality inspection, and the national standard test bench is strictly debugged to ensure that each factory unit has reliable performance.

Reliable and flexible electrical control system

The company uses first-line brand control components to ensure the reliability of the control system hardware.

Part Name

Brand (model number)

Part Name

Brand (model number)

Controller  PLC

Omron CP1 series

Contactor

Schneider LC1-D series

Relay

LY2N-JOMRON LY2N-J

touch screen

Weilun

breaker

Schneider IC65 series

Water pump

Wilo

High temperature flue gas valve

LAPARItaly LAPAR

Electric control box

Wuxi Kangbei (the same quality as Rittal)

Our company has further improved the COP of products through self-developed and optimized control procedures. The control system has protection functions such as water shortage protection, high temperature alarm, and automatic shutdown of faults. According to the needs of users, our company can individually design the control system to meet the various needs of users.

Simple and convenient operating system

The user can switch on and off with one key, and can also choose time switch, temperature control switch and other methods to control the start and stop of the unit, which increases the convenience of operation for customers. The unit's touch screen displays real-time operating data, and users can also collect unit operating data through remote monitoring.

Flexible use place

The heating and cooling generators are suitable for large hotels, biogas power stations, ports, construction sites and other places. In addition to the stand-alone power generation, the unit can also be integrated into the municipal power grid (the grid-connected mode is optional), and the reliability of power supply is greatly improved. In addition, the generator set can cooperate with our company's vacuum hot water unit, single and double-effect refrigeration unit and other equipment to realize different forms of cogeneration systems such as combined heat and power, combined cold and power.